For Milwaukee 22-22-1630 Carbon Brush Card Assembly 22 22 1630

Description

This part replaces obsolete part 22-22-1630.
This assembly holds carbon brushes around the armature to provide stable contact. This assembly consists of: plastic holder ring, four (4) metal brush holders with springs and four (4) carbon brushes with lead wires attached.
Compatible with these models:
Milwaukee 22-22-1630;
Milwaukee M18 M28 18V Drill 2602-20,2601-20;
Milwaukee Impact Driver for 2650-20,C18ID,C18PD, C18DD,C18IW;
Milwaukee HD18PD HD18DD HD18HIW 18V battery drill ,18V battery impact driver;
Milwaukee HD18PD C18PD 290069199 C18ID C18PD C18IW HD18HW HD18PC HD18DD.
To replace this assembly you would need a screwdriver.
• First remove screws holding the cover together
• Carefully separate housing to gain access to armature and brush holder
• Disconnect the wires
• Remove the screws holding brush card assembly
• Remove old brush holder and install the new assembly
• Reassemble and test your tool
Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that’s operating intermittently. New brushes can restore a motor’s electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.