FOREDOM Flex Shaft Motor Square Drive Built-in Dial Control M.TXMH & H.25H HDP

Description

FOREDOM FLEXSHAFT TX 1/3HP HIGH TORQUE
BENCH MOTOR with BUILT IN CONTROL and H.25H Handpiece
EQUIPPED with a 63" LONG SQUARE DRIVE SHAFT
-
Foredom’s bench style version of higher torque flex shaft Series THX motor has an integrated dial speed control built into its cast-iron base for manual speed adjustment and easy placement anywhere on the workbench. It comes equipped with a longer square drive shaft and heavy-duty protective sheath and H.25H handpiece.
SPECIFICATIONS:
Foredom Model # M.TXMH
JETS SKU # 0615-62024 H.25H
-
M.TXBH Motor Description:
This is a square drive model, has exactly the same motor specifications as the M.TXB.
Series TXB motors are Foredom’s
most powerful flex shaft machines
with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver
more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM.
Square drive flex shafts are the ultimate power tools
for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones.
This model comes equipped with a 63" long, square drive shaft and heavy-duty protective sheath in place of the standard key-tip shaft and sheath -
(SEE LAST PICTURE)
NOTE:
This Square drive shafting unit does not come with a Handpiece  -
ONLY works with Foredom's 4 Square Drive handpieces-
H.25H, H.28H, H.30H, and H.44HT.
*** M.TXMH motors are available ONLY in 115 Volt.
-
Built-in Speed Control Description:
The hand dial is used to adjust and set speed. This manual-style control allows you to maintain and return to the desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit.
-
H.25H is a collet type square drive handpiece
with larger, permanently lubricated and shielded ball bearings for cool running and continuous use. Has positive locking mechanism (locking ring) for use with Series SRH,
TXH
, LXH and discontinued H motors. Comes with 1/8" (installed) and 1/4" collets, pin and wrench for changing collets and accessories.
6-1/8" long, 1-1/32" Dia. (center), ship it. 11.35 oz.
This handpiece is
NOT
interchangeable with Foredom "Interchangeable" style handpieces. Other size collets are available separately or in Collet Set HP103000, see below.
-- A Two Year Limited Warranty on Motor and Control from Foredom.
H.25H, H.30H, H.44HT, and H.28H are Foredom's four square drive handpieces that work with this motor-speed control. See Our Store.
Ships Ground
NOTE: Visit
JETSTOOLS
our eBay Store Listings, where you can see other FOREDOM products Handpieces and many of the components along with a line of
J
ewelers
E
quipment
T
ools
and
S
upplies.
JETS INC.
218  CKP   M P