NEW SPX Hytec 100857 In-Line High Pressure Hydraulic Filter,5000PSI,1/4" N.P.T.F

Description

NEW SPX Hytec 100857 In-Line Filter,Bi-Directional,1/4" N.P.T.F, 100919 ,300624
Max Capacity : 5,000 PSI
SAFETY PRECAUTIONS WARNING: To help avoid personal injury, • Do not exceed the 5,000 PSI hydraulic pressure rating of this component. Creating pressure beyond the rated capacity can result in personal injury. INSTALLATION This filter assembly is bi-directional and can be installed in uni-directional or bi-directional circuits. Filter orientation is not critical. Severe pressure/flow surges can cause the element to fatigue and release contaminants downstream. Surges, caused by releasing accumulators, can be reduced by installing a "meter-out" needle valve (Hytec #15068) in the accumulator's outlet to slow its release of oil.
No. 100857, 100919 - These high pressure, non-bypass, in-line filters are suitable for both unidirectional and bi-directional circuits. This allows the filter to be installed in single acting or double acting circuits downstream from the control valve where the fluid flows in both directions. It's specially reinforced, stainless steel mesh filter element resists fatigue from pressure spikes. Both are ideal for use in pallet coupling circuits to protect components from contaminants introduced at the couplers. The No. 100857 is ideally suited for Hytec's No. 100223 manual pallet valve. Simply remove the coupler from the pallet valve and install this filter between the valve and coupler. Features • 5,000 psi maximum operating pressure • Low pressure drop • Removable/replaceable elements
SERVICE INTERVAL This filter is designed to remove contaminants so small that they are not visible to the human eye. Filter element should be replaced every 50,000 pressure cycles regardless of visual filter condition. More frequent replacement may be necessary depending on the overall cleanliness of your system. If the filter is opened for inspection purposes only, see step #2 of "Replacement of Filter Element" below. Remember, contaminants too small to be seen can be collecting in the filter and degrade system performance. The filter should be replaced before system performance changes are evident. REPLACEMENT OF FILTER ELEMENT 1. To disassemble, hold the filter body and remove the threaded plug in the female port side of the filter. 2. If contaminants are visible, discard the filter element but retain the support discs. If the filter is being disassembled for inspection only, and is to be reassembled with the same filter element, the filter must be installed facing the same direction that it was originally. IMPORTANT: Attempting to clean the filter element and/or reversing it during reassembly will release contaminants into the hydraulic system that can cause component damage or failure. 3. Clean each individual component carefully with a filtered solvent or clean water. IMPORTANT: Do not attempt to clean the filter element! Always replace it with a new filter. 4. Reassemble filter unit with new o-rings, backup washer, and filter element. Support discs must be installed with the screen side facing the filter element. Orientation of the new filter element is not critical. Torque the threaded plug into the filter body at 300 in. lbs.
Shipping -
All packages will be sent via USPS either first class mail ( 3-5 days ) or priority mail ( 2-5 days ). I try my best to ship all packages the same day or within 1 business day.
If you would like your package shipped via UPS, Fedex or any other shipping method
please let me know ahead of time
. There will be an additional fee depending on what you wanted. If you have an account that you wanted me to use to ship your item, I will gladly accommodate.
International buyers -
I ship using eBays global shipping program so I will send it to eBays headquarters in Kentucky, and they will ship it to you from there.
I can not be held accountable once the package arrives to their facility
.
Item Descriptions -
If I have a quantity of items, I may use a generic picture for them all. I will only do this if all of the items are of the same quality.
Disclaimer -
All the items I sell have been tested to the best of my knowledge. I store everything I sell in a controlled climate room for better protection and preservation.
If for any reason you are not 100% satisfied with your purchase, please contact me via eBay messenger
. I will do my very best to resolve any issues you may have because a positive feedback is very important  to me.
All NEW and USED items that I sell come with a 30 day 100% money back guarantee
. I do
NOT
accept returns or offer money back on any FOR PARTS / NOT WORKING items, I will describe them to the best of my potential and they will be sold as - is.
Buyers are encouraged to test the purchased item thoroughly before use. I can
not
be held accountable for any damages caused to any equipment for any reason.
Listing and template services provided by inkFrog